Preparation for Setting Up
Prepare the housing
Prepare the digital camera
E-7
This product must be used in combination with the optional equipment
(digital camera, port, strobe, accessories etc.) for underwater photography.
In order to set up the equipment, prepare each item correctly.
This product is exclusively designed for use with Richo GR DIGITAL
Ⅳ
digital camera. Other cameras are not compatible with this product.
This product is kept watertight by the O-ring.
To keep the O-ring functioning properly,
please observe the following before setting up.
Make sure to remove the O-ring when maintaining.
For detailed O-ring maintenance methods,
please see the O-ring maintenance manual.
Maintaining the O-ring
Make sure that there is sufficient battery power remaining and the image
storage medium has enough room for the number of pictures.
Remove the strap from the camera if any of these accessories are
attached.
Make sure the camera is operating correctly, referring to the camera's
instruction manual for details.
CAUTION
Make sure to fit/install the O-ring into the groove properly after maintenance.
Prepare the connecting accessories
When using external strobes, lights or other accessories in combination
with this product, prepare the equipment before setting up.
If the accessories are kept watertight by O-rings, make sure the O-rings
are properly maintained.
If the accessories are powered by batteries, make sure that there is
sufficient battery power remaining.
Make sure the equipment is operating correctly, referring to the instruction
manual provided with the equipment.
O-ring
