E-12
Connecting the Strobe
Connect the strobe with the fiber-optic cable (option) when the strobe is
triggered by sensing the light from the camera's built-in flash.
CAUTION
Before inserting the fiber-optic cable, check to make sure that there are
no scraches or dirt on the connector surface. Scratches or dirt may
cause the strobe to malfunction.
To protect the surface from scratches or dirt, do not remove the caps from
the fiber-optic cable sockets when the cable is not inserted.
There is no possibility of water leaking from the fiber-optic cable socket
even if the fiber-optic cable/cable socket cap is removed underwater.
After the strobe is connected to the housing, make sure to check that the
connected strobe functions correctly before underwater use.
After each use in salt water, make sure to remove the fiber-optic cable
socket adapter from the housing, and then thoroughly soak the adapter
and housing in fresh water.
2
Insert the fiber-optic cable's
connector into the socket until
it stops
Remove the fiber-optic cable
socket caps
Do not remove the caps from
fiber-optic cable sockets not in use
to keep light from entering in.
1
Fiber-optic cable socket cap
