Identification of Parts
E-8
This model comes equipped with a standard finder (0.66x). The finder is
replaceable; if you replace it with an optional finder unit, you can change the
finder magnification to match your shooting conditions.
Replacing the finder
1
Rotate the finder unit mounted on
the rear case in a
counterclockwise direction to
remove it
z
The screw areas are coated in grease,
so be careful not to touch them.
2
Rotate the replacement finder unit
in a clockwise direction to attach it
CAUTION
z
Before attaching the finder, check to make sure that there is no dust, dirt,
or debris inside it.
z
When replacing the finder, do not touch the surface of the finder lens.
Finder
