中文
EN
D
LCD PL
ATE AMPLIFIER
47
46
SYSTEM SETTINGS > SW INFORMATION
This screen shows the most relevant information about the amplifier's firmware, which can be important
not only for users but also for service technicians.
-
MCU
: Software version of the Micro Controller Unit.
-
FW
: Firmware version.
-
Model
: model of your SE AUDIOTECHNIK® product.
SYSTEM SETTINGS > LOCK
In the
Lock
menu, the user can set one of the following options for the screen locking function:
-
Automatic Lock
: This option will lock automatically the amplifier's screen after 10 seconds by
default. To set a different value, between 2 and 60 seconds, follow the same procedure described
for the LCD Backlight submenu.
-
Lock Now
: This option will lock the screen instantly. The selected settings for Automatic Lock or
No Lock, are kept.
-
No Lock
: This is the option set by default. It will disable the automatic lock function and make the
screen always accessible.
Remember that when the screen is locked, the "
L
" letter is shown in the top-right part of the
Overview
screen. To unlock the amplifier, press the controller for 3 seconds until the message "
Screen Unlocked!
"
is shortly displayed on the screen. This message details the active preset as well.
SYSTEM SETTINGS > MENU TIMEOUTS
In the
Menu Timeouts
, the preferred behavior of the main
MENU
can be configured:
-
On, jumping out
: After five minutes of inactivity, the display returns to the
Overview
screen.
In M-F3A PRO FS this time are 20 seconds.
-
Off, stay in menu
: the display stays in the current menu indefinitely. This option is selected by
default.
LOCK
Back
> Automatic Lock
Lock now
Never Lock
Figure 43.
Screen Lock menu.
Figure 44.
Menu Timeouts menu.
MENU TIMEOUTS
> Back
On, jumping out +
Off, stay in menu
Figure 42.
SW Information menu of the S12 PRO.
SW INFORMATION
Back
> MCU: 0.0.4.2
FW: 20190624
MODEL: S12 PRO
