SPOT Phone Setup
SPOT Phone Setup - Page
- Page 12
12
SPOT 14.4
SPOT 14.4 User's Guide
User's Guide
38GDE00001SCF - Issue 4 (11/96)
38GDE00001SCF - Issue 4 (11/96)
SPOT Phone Setup
SPOT Phone Setup
LD or MF Dialling
LD or MF Dialling
Most phone lines support LD dialling. This sends a series of clicks or
pulses for each number dialled. Most phone lines also support MF
dialling which sends a tone for each number dialled (also called DTMF).
MF dialling is faster, more reliable and provides access to special
services provided by some exchanges (eg. call waiting indication). SPOT
starts in MF mode by default.
If your SPOT does not appear to dial properly, switch to LD dialling. If this
cures the problem, then you may have an LD only telephone line. When
using LD to dial out, you can switch the SPOT to sending MF tones after
Note:
Note: SPOT can only provide LD dialling with its power supply unit
connected.
To set up SPOT for LD or MF dialling
To set up SPOT for LD or MF dialling::
1. Without picking up the handset, press SETUP
SETUP. While the lamp flashes
(for 4 seconds), select one
one of the following:
– To set LD dialling, press 11.
– To set MF dialling, press 2.
2.
2. Press the SPEAKER
SPEAKER key to put the SPOT back to idle.
