
INDeX - TT 3/5 Turret Guide
38GDE00001SAB - Issue 6 (June 1998)
Horizontal: 84mm between centres
Use No.8 Pan or Round Head Screws
Terminal Wall Mounting Brackets
Clearances: Allow 170mm below,
70mm above, 40mm either side
Wall & Desk Brackets:
Plastic 'shoes' exist which clip onto the base of DT & TT
turrets. These raise the desktop viewing angle of the turret.
They also reverse for turret wall mounting
(with the addition
of two screws)
. To do this you require one pair of brackets
per turret. Screws and wall-fixings are not included as they
vary with the wall type.
Do not copy or distribute any part of this manual to any
third parties without the written permission of SDX
Business Systems. SDX Business Systems reserve the
right to make changes without any prior notice.
Windows is a trademark of Microsoft Corporation,
Novell is a trademark of Novell Inc. SDX and INDeX are
registered trademarks of SDX Business Systems plc.
SDX Business Systems plc
Sterling Court, 15-21 Mundells,
Welwyn Garden City,
Hertfordshire,
AL7 1LZ
Internet: http://www.sdxplc.com