SDT International SDT170, User Manual

Page: 34 / 141

7. Presentation
MAN.170.EN--04--SDT170-user-manual-Eng.docx 34/141
The measured data and its complementary information
The display shows the measured data and its complementary information
described in the lower paragraphs, which are:

Measured value.

Measurement units.

Amplification level selected.

Icon of the amplification level.

Bargraph.
The main information relating to the measure.
031
The measured value
The measured value is shown in the middle of the screen. It should be
remembered that for each memory number the last four measurements can be
recalled at any time, by pressing the key and selecting the
VIEW DATA
menu.
Refer to chapter 10 for more details on this operation.
The measurement unit (except S version)
The measurement unit is shown on the right side of the display, such as
dBµV
.
The measurement scale (S version only)
It varies according to the amplification level as shown in the following table.