SDT International SDT170, User Manual

Page: 124 / 141

23. Specificities of the SDT 170 M, M+ MD
MAN.170.EN--04--SDT170-user-manual-Eng.docx 124/141
The SDT 170 M, M+ and MD contain 1,000 memory locations and each memory location
can store up to 4 measurements.
010
Usage
A memory number is generally attached to a physical location. For example,
‘
Workshop 3
– waste water return pump ’ could define memory location one.
For each memory location (the physical location in reality), the user defines the
type of sensor to be used. For example, the ultrasonic sound level on the front
pump bearing, the pumps rotation speed and temperature is to be measured.
For each memory location (measurement point) a 12 characters label can be
defined and uploaded from a personal computer in the
SDT 170
’s memory (MD
version only). See the corresponding user manual of the SDT 170 - Data
Management software for more information.
In this example, on memory location number 2, four measurement type have been done (T°,
dB

V,
RPM and dBA).
013