background image

 
 

4. Warranty obligations 

 

The  manufacturer guarantees the operation of product subject to the rules of exploitation 

set forth in the exploitation manual. 

Warranty period of set - 12 months from the date of sale. 
During the warranty period of exploitation the owner has the right to free repair in case of 

failure of the modulator. 

During the warranty period of exploitation, the repair is accomplished at the expense of the 

owner,  if  he  does  not  use  the  product  in  accordance  with  the  exploitation  manual,  does  not 
follow the recommendations of the manufacturer... 

The device is removed from the warranty in the following cases: 

 

If the device is opened;

 

 

If there is mechanical damage;

 

 

If the exploitation is not carried out in accordance with this user manual.

 

 
Current  modulator  M1-03  meets  technical  specifications  and  is  considered  suitable  for 
exploitation. 
Release Date ________________ 2015. 
Seller: ____________________________Stamp 
 
Brand of car (in which the equipment is installed): _____________________ 
Mileage at the time of installation: ____________ 
Set by: ________________ / __________________________ / 
Install Date: _____________

 

Summary of Contents for M1-03











Reviews: