Operation & Maintenance Manual
──
LG936 Wheel Loader
57
1.2.3 Steering Wheel
The steering wheel is at the operator cab, see “
1.1 General View of Controls and
Gauges Figure 3-1
” in this chapter. Steering wheel and Steering unit are connected. When the
machine work fine, turn the steering wheel clockwise, the machine turn right; turn the steering
wheel counter-clockwise, the machine turn left.
The features are listed below:
z
The rotation angle of steering wheel and that of machine is not equal. Continuously turn the
steering wheel; the machine rotation angle will increase until to the needed position.
z
The faster the steering wheel turns, the faster the machine turns.
z
Steering wheel will not come back after turning, and the turning angle of machine will be kept.
After finishing turning of machine, turn the steering wheel reversely to keep the machine move in
straight direction.
1.2.4 Control Levers and Pedals
z
Speed Control Lever
This lever controls the
direction and travel speed of
the machine.
It is
neutral
if the lever at
N
(or O) position; it is forward I
if push forward to 1 (or
I)
position; it is forward II if push forward to 2(or
II)
position. The machine will move backward if the
lever is at
R
position.
z
Working Equipment Control Lever(or Handle)
(1)
Working Equipment Control Lever
Please see “
1.1 General View of Controls and Gauges Figure 3-1
”.
Bucket Control Lever
This lever controls the bucket, it has three positions.
¾
Rear Tilt is used for drawn in bucket
¾
Neutral is used for remaining at a certain position.
¾
Forward Tilt is used for dumping.
Lift Arm Control Lever
This lever controls the lift arm, it has four positions.
¾
Lift is used for lifting.
