Operation & Maintenance Manual
──
LG936 Wheel Loader
29
z
Before driving up, lock the front and rear frames with
Safety Bar,
put the working equipment
control lever(or handle) in the middle, wedge the tire from the opposite side. Put the cushion
blocks under the machine.
8.4 Working under the Machine
z
Park the machine in firm ground. Level the working equipment to the ground before work under
the machine.
z
Wedge the tire firmly.
z
It is dangerous to work under the machine only using
the working equipment to support the machine.
z
Never
work under the machine without good support.
8.5 Working on the Machine
z
Make sure the top of machine is no block and clean when work on the top of machine. Follow the
disciplines below:
△
!
NOTICE
z
Do not leak the lubricant or grease
z
Do not put the tools around.
z
Walk placidly.
z
Never
jump down from the machine. When climb up and down the machine, face the machine
and keep three point contact (two hands –one foot or two feet one hand) with the handrails and
pedals to ensure safety
z
Use protects equipment if necessary.
z
Never
stand on the top of engine hood because it is slick and dangerous.
z
Never
stand on the top of tire, because it is slick and dangerous.
z
Stand on the mudguard of the front frame and seize the handrail to clean the front glass of
operator cab.
8.6 Maintenance during the Engine Working
Do not maintain the machine during the working of engine to prevent hurt. If it is necessary, please
follow the rules below:
