Operation & Maintenance Manual
──
LG918 Wheel Loader
40
z
Do not let the voltage-raising cables touch each other or let the clamp touch the machine when
the voltage-raising cable is removed.
8.19 Maintenance and Storage of Tires
8.19.1 Maintenance of Tires
z
The Explosion of a tire can push the parts, such as tire, rim and driving axle, as far as 500m or
more. The explosion and the particles can lead to severe injury, even death, so please keep the
pressure of the tire at the normal level. Inflation pressure should not surpass the standing value.
The inflation pressure is shown in
CHAPTER II - 8 TECHNICAL PERFORMANCE
& PARAMETERS
.
z
Driving at high speeds increases the temperature, and therefore, the pressure. Never try to reduce
the pressure, but reduce the speed to cool the tire. Continuous high speed driving can lead to over
heating and tire explosion.
z
Stand at the back of the tire, and stand as far as possible away from the tire when adjusting the
pressure of the tire.
z
Check the tire and rim every day for cracks or bubbles. Never operate in a low pressure
condition.
z
Check that the bolt and nut of the rim are in place. Check whether the torque of the nut satisfies
the suggested value of the factory.
z
Never stand in the front or the rear of the rolling direction of the tire. Check the tire from the side.
If disassembling one tire lock the other tires.
z
Take care when welding near a tire, which can cause explosion of the tire.
z
Only a trained person with a professional license can repair a tire and rim using specific tools and
following the proper steps.
z
Use the uniform tire with the same standard and same flower pattern
for replacement.
8.19.2 Storage of Tires
z
It is the basic rule that tires should be stored in a warehouse. No one
can enter without permission. Put a fence around and hang a “No
Enter” sign if the tires are stored outside the warehouse.
z
Store the tires in a dry and clean place. Water can oxidize a tire, and
