Operation & Maintenance Manual
──
LG918 Wheel Loader
36
z
Choose a proper container to hold the liquid when replacing the coolant, mobile oil of the engine,
oil of the transmission box and cleaning the parts.
Please refer to
8.20 Waste Materials
in this
chapter for the methods to deal with the waste liquid.
z
Keep fire off when disassembling the connection
pipe of the air condition compressor.
8.12 Examination and Repair of Hydraulic System
z
Lock the oil tank and other hydraulic equipment safely; release the pressure of all hydraulic
systems before examining the hydraulic system.
z
Never bend or beat the high pressure hydraulic pipe. Never assemble the hard pipe and soft pipe
if they are bent abnormally or broken.
z
Routinely repair any loose or broken fuel oil circuits, lubricating oil circuits, the hard and soft
pipe of the hydraulic system. Leakage can cause fire, so routine maintenance is critical.
z
Examine the pipe system carefully (hard pipe and soft pipe), screw down the connectors
according to the proper torque. Do not examine a leak using your hand, rather use a board or
paper board. The leaking hydraulic liquid may penetrate your skin and cause death. If the liquid
splash onto your skin, the case of a physician trained for this kind of “burn” will be immediately
required.
z
Make sure all the pipe clamps, protective board, and anti-heat cover are installed properly to
prevent vibration and overheating due to friction with other parts.
△
!
NOTICE
Please replace these parts in the following conditions:
z
Connectors are broken or leaking.
z
Outside of soft pipe is abrasive or cracked, and the steel wire of the
strengthening layer is bare.
z
Local of soft pip is upheaval.
z
Soft pipe is obviously torqued or staved.
z
Steel wire of strengthening layer penetrates the outside layer.
z
The end connectors are misplaced.