36
SD GlucoNavii® NFC BLOOD GLUCOSE MONITORING SYSTEM
T
esting
Y
our Blood Sugar
36
2. Performing a Blood Glucose Test
1)
Remove a new test strip from container. Be sure to tightly
replace container cap after removing test strip.
2)
Make sure the meter turn off. And then, Insert the test strip
into the meter.
3)
When the blood drop symbol flashes (Blood Stand-by
Display), you are ready to perform a test.
4)
Let your arm hang down at your side to allow blood to
flow to your fingertips. Grasp your finger just below the
joint closest to the fingertip.
5) Obtain a drop of blood sample using the lancet and
lancing device.
6) Hold your finger to the tip of the strip until the yellow
window is completely filled with blood. Do not place the
blood drop on top of the strip.
Always wash hands with warm, soapy water. Rinse
and dry them before testing.
NOTE
NFC
