
26
SD GlucoNavii® NFC BLOOD GLUCOSE MONITORING SYSTEM
Understanding
Y
our Ne
w S
y
stem
3.
If you finish data review setting mode, next appear at the
strip-stand by display.
11. Using SD GlucoNavii® NFC Test Strips
[ Important Test Strip Information ]
t
SD GlucoNavii® NFC blood glucose test strip should be
used with SD GlucoNavii® NFC meter. Using other glucose
test strip can cause inaccurate the result or ‘E-1’ error
message.
t
After removing a test strip from the container, replace the
container cap immediately and close it tightly.
t
Use the test strip within three minutes after you take it out
of the container.
t
Store test strip containers in a cool, dry place at 2-32°C(36-
90°F). Keep away from direct sunlight and heat. Do not
refrigerate test strips.
t
Do not expose strips to heat, moisture or humidity.
Temperatures outside the required range, as well as
moisture and humidity (e.g. bathroom, kitchen, laundry
room, car, or garage) can damage your test strips and lead
to inaccurate results.
t
Store test strips in their original container only to avoid
damage or contamination. Do not transfer test strips to
any other storage device, and do not store outside of their
original container.
t
Do not use test strips from any container that is damaged
or left open to air.