SD Biosensor SD Gluco Navii, Operations & Procedures Manual

Page: 19 / 40

17
2. If your blood glucose is above 600 mg/dL, you will receive a “HI” indication on the
display. If below 20 mg/dL, you will receive “Lo” indication on the display. In these
cases, repeat the test with new test strip. If this message appears again, contact your
healthcare professional immediately.
Your Test Results
1. After 5 seconds from applying blood into strip, you will receive a result. Displayed
results using the GlucoNavii™ range from 20mg/dL to 600mg/dL.
DISPLAY FOR
NORMAL RESULT
DISPLAY FOR
HI & LO RESULTS
3. If you set the pre-meal mark before your test, your result will be stored with a
pre-meal mark. ( ). If you set the post-meal mark before you test, your result will be
started with a post-meal mark ( ).
Pre-Meal Post-Meal