background image

The 

Astra 1000RS Series

is a state-of-the-art remote starting system with an integrated 2-way paging

feature.  With proper installation, this system will provide superior protection and performance for many

years to come. 

The 

Astra’s 1000RS Series

built-in remote start feature is designed to offer maximum convenience by

remote starting your vehicle’s engine, turning on the heater/air conditioner, and then running for a pre-

determined time to provide a comfortable environment once you enter your vehicle.

ScyTek Electronics Inc. and its VENDORS shall not be liable for any accident resulting from the use of this

equipment. This system is designed to be professionally installed into a car or vehicle in which all items,

such as parking brake and all associated components, door switches, transmission shift linkage, throttle

linkage, and all engine safety features, are in perfect working condition.

On MANUAL TRANSMISSION  vehicles only install the Astra 1000RS-M remote starting

system. Verify that the vehicle transmission is left in neutral position. If accidentally left in

gear the vehicle could become a self-propelled threat to life and property.

DO NOT remote start the vehicle in a closed garage. Make sure that the garage door is open or there is

adequate ventilation. Failure to observe this rule could result in injury or death from poisonous Carbon.

To ensure the safety and security of the system while it is remote started, the Astra Starter employs

several safeguards.  In the event the brake pedal is pressed while the engine is remotely running, the

remote start will immediately shutdown to prevent unauthorized users from attempting to drive the

vehicle.  The system is equipped with a hood pin input to prevent access  to the engine compartment

while the vehicle is remotely running.  Finally, the Valet Mode prevents the remote start feature from

operating in the event the vehicle is to be serviced.  

System Contents:

Main control unit w/wiring harnesses.

One 5-Button Random Coded Transmitters and one 2-Way LCD Transmitter (1000RS-2W-1)

Two 5-Button Random Coded Transmitters  (1000RS)

Status LED

Emergency Override / Valet Switch / Call Button built into the window mount antenna (see page 23)

Rellay Pack

Options and Convenience Features

*

This ScyTek system includes several optional inputs and outputs allowing the creation of a completely

personalized convenience system by offering many optional features such as:

Astra 1000RS Series  -  Page 1

· Second Car Operation

· Keyless Entry

· Power Trunk / Hatch 

Release

· Siren

About  Your  System

PLEASE NOTE:

Some of the features described in this manual may require additional parts and/or labor, and may not be included

as part of the standard installation of this unit.  Additionally, many features of this security system have

selectable options that must be activated or programmed during the system’s installation.  These items will be

identified in the following sections.  Please discuss these features and any questions you may have regarding the

installation of this product with Your Authorized Dealer.

Summary of Contents for Astra 1000RS Series





























Reviews: