SCW The Networker POE series, User Manual

Page: 62 / 138

62
 Channel: select the current camera channel.
 Protocol: select corresponding PTZ protocol(such as PELCOD)
 Address: default address is 1.
 Baud rate: select corresponding baud rate. Default value is 9600.
 Data bits: select corresponding data bits. Default value is 8.
 Stop bits: select corresponding stop bits. Default value is 1.
 Parity: there are three options: odd/even/none. Default setup is none.
Figure 6-48
After completing all the setting please click save button.
In one window display mode
, right click mouse (click “ Fn ” Button in the front panel or click “ Fn ”
key in the remote control).
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 6-49.
Here you can set the following items:

Step: value ranges fro 1 to 8.
 Zoom
 Focus
 Iris
Please click icon and to adjust zoom, focus and iris.
Figure 6-49
In Figure 6-49, please click direction arrows to adjust PTZ position. There are total 8 direction
arrows.