ScubaJet Pro, User Manual

Page: 9 / 25

16 17
5.2. USING THE FINBOX ADAPTER AND BT LINK ON YOUR SUP
click
2
Attach the SSC BT Link to the SCUBAJET rail
on the tube by holding the SCUBAJET upside.
Wait until the SJ logo is blinking, then it’s ready
for pairing.
3
Make sure the SCUBAJET does not protrude
over the edge of the SUP board.
4
The SSC BT Link has to be placed on top
of the board above the water surface.
1A
SlideIn Finbox : No screws necessary for
the SlideIn Finbox. The clip must engage.
1B
US Finbox : Tighten the screws
with the Allen key.
click
Velcro
SSC BT
Link
1
Put the SUP with the
SCUBAJET in the water
and make sure that you
have enough space and
that you do not hit any
obstacles.
2
Stand or kneel on
the SUP and take the
remote control.
3
Attach the remote
control to your wrist,
paddle, lanyard or
the equipment so you
cannot lose it in case
you fall off.
4
If you fall off the board,
the SCUBAJET will stop
when the distance
between remote and
SCUBAJET becomes
too far.
If you fall off the board assure that the remote also falls into
the water, otherwise the SCUBAJET won't stop.

ATTENTION

TIP
Put the
board upside
down in the
water before
mounting the
SCUBAJET.