Document# SCT-UM2A61VC
Page 4 of 11
1. Purpose
This document explains how to install, configure, and perform a quick functional verification test of the SCT Radio
Thorium SC2444 mmWave frequency converter.
2. Electromagnetic Compatibility
This product has been designed (but has not yet been tested) to meet regulatory requirements and limits for
electromagnetic compatibility (EMC). These requirements and limits provide reasonable protection against harmful
interference when the product is operated in the intended operational electromagnetic environment.
This product is intended for use in laboratory environments. However, harmful interference may occur in some
installations, when the product is connected to a peripheral or test device, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and prevent unacceptable performance
degradation, install and use this product in strict accordance with the instructions in the product documentation.
CAUTION: To minimize the risk of EMC interference, operate this product with shielded cables and
accessories.
3. Unpacking and Installation
CAUTION: To prevent electrostatic discharge from damaging the device, ground yourself using a
grounding strap or by holding a grounded object, such as a computer chassis. Never touch the exposed
pins of any connectors.
Touch the antistatic package to a metal part of a computer or other grounded test equipment.
Remove the device from the package and inspect the device for loose components or any other sign of damage.
Notify your reseller if the device appears damaged in any way. Do not attempt to install a damaged device.
Store the device in the antistatic package when the device is not in use.
3.1
Other Equipment
There are several required items not included in your device kit that are required to operate the SC2444.
AC mains power cable with C13 plug
USB Type C cable
SMA(m) to SMA(m) RF cables
2.4 mm (m) to 2.4 mm (m) RF cables
Additional items will also be useful for most applications:
Coaxial male to female attenuators with SMA connections and 2.4 mm connections
3.2
Installing the SC2444 Hardware
Remove plastic protection caps from any SMA and 2.4 mm RF port connectors that will be used during testing.
It is recommended to leave the caps on unused ports to keep them free of dust and debris.
