OPERATING INSTRUCTIONS
OF REMOTE CONTROL SL2392 USED IN COMBINATION
WITH “W” (SL2380) AND “M” (SL1963) RECEIVER SYS-
TEMS
Remote control SL2392 has 99 channels, therefore it can
control up to 99 receivers.
It features:
• a display showing the channel number se-
lected
• two push-button controls marked with
arrows
for raise and lower, and pro-
gramming for the remote function.
• two push-buttons for channel selection,
marked by
• a Reset push-button for immediate return of the indicated
channel to channel 00
Operation:
To move the blind, press the or push-button throughout
the duration of low speed, then release it when high speed
is activated.
To tilt the blind, slightly press the or push-button.
To program the remote control, refer to the instructions en-
closed to “W” and “M” receiver systems.
Battery substitution
When remote control batteries are
exhausted, the display will show
the message “Batt”. In order to
replace the transmitter battery,
open the back cover, remove the
spent battery and introduce a new
one (CR2430 3V Lithium).
7
Disegno di proprietà della Pellini S.p.A.. Vietato esporlo o riprodurlo senza autorizzazione.
N° REVISIONE
DATA
SCALA:
TOLL. GEN.:
MATERIALE:
TRATTAMENTO:
CLIENTE:
DATA:
APPR.:
DIS.:
DESCRIZIONE:
DISEGNO:
±0.2
Telecomando radio
SL2392
08.02.13
S.B.
ing. G.Nicolosi
Pag. 1 /3
DESCRIZIONE
40
12
8
11
GB
Disegno di proprietà della Pellini S.p.A.. Vietato esporlo o riprodurlo senza autorizzazione.
N° REVISIONE
DATA
SCALA:
TOLL. GEN.:
MATERIALE:
TRATTAMENTO:
CLIENTE:
DATA:
APPR.:
DIS.:
DESCRIZIONE:
DISEGNO:
±0.2
Telecomando radio
SL2392
08.02.13
S.B.
ing. G.Nicolosi
Pag. 3 /3
DESCRIZIONE
