ZAA2300 Manual
23. September 2021
© Copyright 2021, PROCEQ SA
4
Legal Notices
This document can be changed at every time and without any prenotification or
announcement.
The content of this document is intellectual property of Proceq SA and prohibited to be
copied neither in a photomechanical or electronic way, nor in excerpts, saved and/or be
passed on to other persons and institutions.
The features described in this instruction manual represent the complete technology of this
instrument. These features are either included in the standard delivery or available as
options at additional costs.
Illustrations, descriptions as well as the technical specifications conform to the instruction
manual at hand at the time of publishing or printing. However, Proceq SA policy is one of
continuous product development. All changes resulting from technical progress, modified
construction or similar are reserved without obligation for Proceq to update.
Some of the images shown in this instruction manual are of a pre-production model and/or
are computer generated; therefore the design/features on the final version of this instrument
may differ in various aspects.
The instruction manual has been drafted with the utmost care. Nevertheless, errors cannot
be entirely excluded. The manufacturer will not be liable for errors in this instruction manual
or for damages resulting from any errors.
The manufacturer will be grateful at any time for suggestions, proposals for improvement
and references to errors.
Damages during carriage
On receipt of the goods, check for any visible damages on the packaging. If it is undamaged
you may sign the receipt of the goods. If you do suspect by visual inspection that damage
has occurred, make a note of the visible damage on the delivery receipt and request the
courier to countersign it. Moreover, the courier service must be held responsible for the
damage in writing.
If a hidden damage is discovered while unpacking, you have to inform and hold the courier
liable immediately in the following way: “When opening the parcel we had to notice that …
etc.“ This superficial checking of the goods has to be done within the time limit set by the
carrier, which is normally 7 days. However, the period could vary depending on the courier.
Hence, it is recommended to check the exact time limit when receiving the goods.
If there are any damages also inform your authorized Proceq agent or
Proceq SA
immediately.
Shipment
Should the device be transported again, it must be packaged properly. Preferably use the
original packaging for later shipments. Additionally, use filling material in the package to
protect the device from any shock during carriage.
To protect persons and the apparatus, proper care must be taken when lifting or
carrying it. It is recommended to hold and carry the product on both sides of the
housing. Always remove the glass plate / heating plate before lifting or tilting the
device.