9
ScreenBeam Touch90 Interactive Whiteboard
2.
From the window that appears, click
Calibration
.
3.
A red target appears. Touch the center of the target with a finger or other
pointing device for a few seconds. Make sure your finger or device is per-
pendicular to the surface of the Whiteboard.
4.
The target disappears. Another target appears in the upper right corner
of the Whiteboard. Repeat step 3.
5.
The target disappears. Another target appears in the lower right corner of
the Whiteboard. Repeat step 3.
6.
The target disappears. Another target appears in the lower left corner of
the Whiteboard. Repeat step 3.
No more targets appear. The Whiteboard is calibrated.