5
ScreenBeam Touch90 Interactive Whiteboard
Connecting the Laptop and ScreenBeam Receiver
After the Receiver is connected to the Whiteboard, the laptop and
Receiver must be connected. The procedures to do this differ, depending
on the operating system running on the laptop (either Windows 10, or
Windows 7/8/8.1).
Note
: The default pin is
12345670
.
Windows 10
If the laptop is running Windows 10, go to
http://www.actiontec.com/setupsb
and follow the onscreen instructions.
Windows 7/8/8.1
If the laptop is running Windows 7/8/8.1, go to
http://www.actiontec.com/setupsb
and follow the onscreen instructions.
Note
: If the laptop is running Windows 8.1, connect via the Intel Wi-Di
application. To download the latest Wi-Di version, go to:
http://www.intel.com/go/wirelessdisplayupdate
This link will also allow Windows 7/8 users upgrade to the latest WiDi
application release.
When finished, the installation should look similar to the figure below:
ScreenBeam Touch90 Interactive Whiteboard
Short throw projector
HDMI cable
USB cable
ScreenBeam Receiver