IN
AU
STRAL
IA
PR
OU
DLY BUILT
1
Continued Over.../
INSTRUCTIONS -
CINEMASNAP XL FIXED FRAME PROJECTION SCREEN
Thank you for purchasing a Screen Technics Projection Screen, please
ensure that you read the following instructions fully before attempting to
install this product.
STEP 1.
Layout all components ready for assembly as
shown
Note: Box Section Frame will be supplied
STEP 2.
Push the four corners of the frame together.
Due to frame size, you may need to join frame pieces,
you may need to use a plastic or wooden mallet (not
metallic) to achieve this result.
STEP 4A.
Place corner brackets in each corner of frame
(as shown)
STEP 5.
It is now time to install the L-Shaped brackets and there are two options:
•
The brackets come supplied with self-tapping (Tek) screws that allow you to drill directly
into the frame, anywhere that best suits wall stud supports and the like. Later on in the
installation you will need enough room to re-screw these Tek screws top and bottom of the
frame for final fixing.
•
If you don’t have enough “elbow” room to get at the top of frame with a power or screw
driver at this latter time because of a low ceiling then utilize the nylon bushes supplied
with the small Allen-Key bolt and fix one each to the two top L-Brackets and use the two
locating holes on the top of the frame, although this restricts bracket positioning it allows
you to simply insert the bushes into the holes and then fix the bottom brackets by screws
and your done.
Larger Wall Brackets supplied with XL version
STEP 3.
With the Hex Head Allen-Key screws use the
provided Allen-Key to screw tight all four corners. You
must ensure each of the four corners are square and
there are no large gaps obvious
before you start to
insert Hex head Allen-Key screw, otherwise jamming
may occur.
Note: Box Section Frame will be supplied
STEP 4.
Tighten all internal Allen-Key screws (one on
each corner as shown below), before fully tightening
the external screws.
Note: Box Section Frame will be supplied
CINEMASNAP 235
CINEMASNAP 235
3
Step 4A
Place corner brackets in each corner of frame (as shown below)
Step 5.
It is now time to install the L-Shaped brackets and there are two options:
•
The brackets come supplied with self-tapping (Tek) screws that allow you to drill directly
into the frame, anywhere that best suits wall stud supports and the like. Later on in the
installation you will need enough room to re-screw these Tek screws top and bottom of
the frame for final fixing.
•
If you don’t have enough “elbow” room to get at the top of frame with a power or screw
driver at this latter time because of a low ceiling then utilize the nylon bushes supplied
with the small Allen-Key bolt and fix one each to the two top L-Brackets and use the two
locating holes on the top of the frame, although this restricts bracket positioning it
allows you to simply insert the bushes into the holes and then fix the bottom brackets
by screws and your done.
8 x Larger Wall Brackets supplied with XL version
CINEMASNAP 235
3
Step 4A
Place corner brackets in each corner of frame (as shown below)
Step 5.
It is now time to install the L-Shaped brackets and there are two options:
•
The brackets come supplied with self-tapping (Tek) screws that allow you to drill directly
into the frame, anywhere that best suits wall stud supports and the like. Later on in the
installation you will need enough room to re-screw these Tek screws top and bottom of
the frame for final fixing.
•
If you don’t have enough “elbow” room to get at the top of frame with a power or screw
driver at this latter time because of a low ceiling then utilize the nylon bushes supplied
with the small Allen-Key bolt and fix one each to the two top L-Brackets and use the two
locating holes on the top of the frame, although this restricts bracket positioning it
allows you to simply insert the bushes into the holes and then fix the bottom brackets
by screws and your done.
8 x Larger Wall Brackets supplied with XL version
3
Step 4A
Place corner brackets in each corner of frame (as shown below)
Step 5.
It is now time to install the L-Shaped brackets and there are two options:
•
The brackets come supplied with self-tapping (Tek) screws that allow you to drill directly
into the frame, anywhere that best suits wall stud supports and the like. Later on in the
installation you will need enough room to re-screw these Tek screws top and bottom of
the frame for final fixing.
•
If you don’t have enough “elbow” room to get at the top of frame with a power or screw
driver at this latter time because of a low ceiling then utilize the nylon bushes supplied
with the small Allen-Key bolt and fix one each to the two top L-Brackets and use the two
locating holes on the top of the frame, although this restricts bracket positioning it
allows you to simply insert the bushes into the holes and then fix the bottom brackets
by screws and your done.
8 x Larger Wall Brackets supplied with XL version
CINEMASNAP 235
screentechnics.com.au
AUSTRALIA
22-24 Suttor Road, Moss Vale NSW 2577
+61 2 4869 2100
NEW ZEALAND
44 Mahana Road, Te Rapa, Hamilton
0800 022 821
IN
AU
STRAL
IA
PR
OU
DLY BUILT
ESTABLISHED IN 1990
