IN
AU
STRAL
IA
PR
OU
DLY BUILT
3
Example of Horizontal Spreader Bar Mounting
Example of Vertical
Spreader Bar Mounting
Vertical Spreader Bars are
screwed to the horizontal
spreader bars
as shown above using
supplied (TEK) screws
Horizontal Spreader Bars are screwed to frame top and bottom
as shown above using supplied (TEK) screws
STEP 13.
Attach the screen to the brackets on wall – Wipe down screen frame of any
fingerprints and dust off the screen surface.
Please follow these instructions to ensure trouble free operation;
•
Cleaning of the screen is best achieved by first dusting the surface with a feather duster,
then to remove any stubborn marks, use a small amount of mild detergent and warm water
on a clean white lint free cloth. It is most important that you only treat the actual mark by
this process and not the entire surface.
•
Do not use any abrasive cleanser as this will damage the surface.
Should you have any questions regarding the installation of our projection screens please call our
technical sales desk on +61 2 4869 2100 for assistance.
INSTRUCTIONS -
CINEMASNAP XL FIXED FRAME PROJECTION SCREEN
8
Example of Horizontal Spreader Bar Mounting
Horizontal Spreader Bars are screwed to frame top and bottom
as shown above using supplied (TEK) screws
Example of Vertical Spreader Bar Mounting
Vertical Spreader Bars are screwed to the horizontal spreader bars
as shown above using supplied (TEK) screws
8
Example of Horizontal Spreader Bar Mounting
Horizontal Spreader Bars are screwed to frame top and bottom
as shown above using supplied (TEK) screws
Example of Vertical Spreader Bar Mounting
Vertical Spreader Bars are screwed to the horizontal spreader bars
as shown above using supplied (TEK) screws
