Scrambler Ducati CITY CROSS-E X, User Manual

Page: 8 / 259

07
Assembled item, the handlebar must be installed using the special screws contained in the package.
Model Reference picture In the package Handlebar assembly
City
Cross-E X
- Allen wrench
- No. 4 handlebar
screws
- Adapter for inflation
- Charger
Method:
• Open the package without get the electrical scooter.
• Remove the package from the handlebar.
• Follow the instructions given for your electrical scooter model.
City Cross-E X Instructions
• Lift the steering column, insert the handlebar keeping attention to not flatten the cables.
• Fix the steering column by closing the knob (clockwise in closure direction) of the folding mechanism.
• Insert and tighten the screws in the steering column by using the provided wrench.
• Pick up the product from the package, open the kickstand and check for the product stability.
• Adjust the steering wheel closing mechanism** (if needed).
• Check the tire pressure (see the side of the tire for the recommended value).
• Press the power button to use the electrical scooter.
Model Reference picture **Adjusting the steering column closing mechanism
City
Cross-E X
On the outer part of the mechanism, there is a knob. If the
steering column of the handlebar is poorly stable after closing,
check whether the knob is properly tighten.
2. Package contents and assembly