Scout Boats 300 LXF, Owner'S Manual

Page: 129 / 173

129
Routine Maintenance
13.5 Bilge, Pump & Components
To keep the bilge clean and fresh, it is recommended
that you use a commercial bilge cleaner on a regular
basis. Follow the directions carefully. All exposed
pumps and metal components in the bilge should
be sprayed periodically with a protector to reduce
the corrosive effects of the high humidity always
present in these areas.
Periodically check the bilge pumps and alarms for
proper operation and clean debris from the strain-
ers and float switches. Inspect all hoses, clamps
and thru-hulls for leaks and tightness on a regular
basis and operate all thru-hull valves at least once
a month to keep them operating properly.
Frequently test the automatic switches for the bilge
pumps and alarms for proper operation. This is ac-
complished by lifting the float switch until the pump
is activated. You can also use a garden hose to
flood the bilge until the water level is high enough
to activate the pump.
13.6 Drainage System
It is essential that the following items be done pe-
riodically to maintain proper drainage of your boat:
• Clean the cockpit drains with a hose to remove
debris that can block water drainage.
• Clean the hardtop leg drain holes. This is
especially important just before winter lay-up.
• Flush all gravity drains with fresh water to keep
them clean and free flowing.
• Operate the thru-hull valves once a month and
service as required.
• Run all overboard pumps briefly at least once a
month to keep them operating properly.
Notice:
All drains and pumps must be properly winter-
ized before winter lay-up.
https://www.boat-manuals.com/