ENGLISH
ENGLISH
RECOMMENDED TOOLS FOR SET-UP
Please read this manual and the rear shock manufacturer's manual carefully before
you start the set-up procedure.
In addition we strongly recommend using a tightening torque key with a 6mm allen
key insert.
REAR SHOCK MOUNTING POSITION
Please make sure to mount the rear shock of your SCOTT Voltage FR 700 always as
shown in the picture below (piggy back in the “Top/Bottom” position).
SET-UP OF OTHER SHOCK MODELS
HEADSET STANDARD
SCOTT strongly recommends only using the originally specified shock with the
Voltage FR bike,
as the shock has been carefully chosen to fit and work perfectly
with this bike.
If you use a different rear shock model than the original shock on the bike, please
avoid potential damage to the frame by checking thoroughly that the shock does not
hit the frame in any position.
Please follow these instructions:
Ensure that the rear shock and its accessory parts do not touch the frame when
mounting or suspending.
To check this, release the air/remove the coil, install the shock and compress the
shock completely.
If the shock touches the frame while doing so, do not use this shock in order to
avoid damage to frame, swingarm or shock.
Standard Semi integrated: 1.5”
headset cup can be used.
- S.H.I.S : ZS49 / 28.6 | ZS49 / 30
09 |
BIKE USER MANUAL |
VOLTAGE FR
VOLTAGE FR
| BIKE USER MANUAL
| 08
