manualshive.com logo in svg

Scott Eagle Attack, Operating And Maintenance Instructions Manual

Share
Download
Scott Eagle Attack Operating And Maintenance Instructions Manual Download Page 14

P/N 595224-01 Rev E 7/12

Page 12 of 32

BATTERY INSTALLATION

A single specially designed Rechargeable Battery Pack is used for operation of the 

EAGLE ATTACK

 Thermal Imaging Camera. Install the battery as follows:

1.  Loosen the finger screw on the bottom of the camera handle by turning it counter

-

clockwise. 

2.  When the screw is loose, angle the battery away from the handle and disengage 

the clip on the battery from the slotted bracket on the handle.

3.  Verify that Rechargeable Battery Pack is fully charged. See USE OF THE BATTERY 

CHARGER section of this instruction.

4.  The Rechargeable Battery Pack will only fit into the camera handle one way. 

Hook the Clip on the battery into the slotted Bracket on the camera handle and 

seat the battery against the handle as shown in FIGURE 5. DO NOT FORCE THE 

BATTERY IN. If improperly oriented, the battery will not fit onto the camera. 

FIGURE 5

SLOTTED 

BRACKET ON

 CAMERA

HANDLE

CLIP ON 

BATTERY

Summary of Contents for Eagle Attack





































Reviews:

No comments

Brands by name

Popular brands

Load more brands