P/N 595224-01 Rev E 7/12
Page 8 of 32
WARNING
THE BATTERY CAN EXPLODE, LEAK, OR CATCH ON FIRE IF DIRECTLY EXPOSED
TO HIGH TEMPERATURE, WATER, OR FIRE, OF IF OPENED, DISASSEMBLED, OR
TAMPERED WITH. FAILURE TO HANDLE THE BATTERY PROPERLY MAY RESULT
IN SERIOUS INJURY.
BATTERY CHARGING SYSTEM
The EAGLE ATTACK Charging System provides a secure camera storage and recharg-
ing station for the SCOTT
EAGLE ATTACK
Thermal Imaging Camera. The Charging
System consists of a camera charger assembly which holds a camera with battery and
has an additional bay to charge a spare battery. Reversible hold down straps hold the
camera and battery in place while charging. The charger assembly can be placed flat
on a desk or may be mounted horizontally or vertically. When properly installed in a
vehicle, the Charging System will securely hold an
EAGLE ATTACK
Thermal Imaging
Camera and spare battery to withstand the forces required of such installations. Refer
to the INSTALLATION OF THE EAGLE ATTACK CHARGING SYSTEM IN A VEHICLE
section of this instruction for details.
The Charging System can be powered only with one of the following:
•
100–240 VAC Power Converter (SCOTT P/N 31000366)
•
12 VDC Adapter Cable (SCOTT P/N 40014635)
•
12 or 24 VDC wired directly into the base of the charger.
When using the Power Converter or Adapter Cable, always connect to the charger first
before plugging into the power source.
WARNING
THE CHARGING SYSTEM FOR THE EAGLE ATTACK THERMAL IMAGING CAMERA
IS AN ELECTRICAL DEVICE THAT HAS NOT BEEN EVALUATED FOR INTRINSIC
SAFETY AS AN IGNITION SOURCE. THIS DEVICE IS NOT TO BE USED IN A
POTENTIALLY EXPLOSIVE ATMOSPHERE. USE OF THE CHARGING SYSTEM FOR
THE EAGLE ATTACK THERMAL IMAGING CAMERA IN A FLAMMABLE OR EXPLOSIVE
ATMOSPHERE MAY RESULT IN IGNITION OF THE ATMOSPHERE RESULTING IN
SERIOUS INJURY OR DEATH.
CAUTION
SOME POWER SOURCES ON VEHICLES ARE NOT ACTIVE ALL THE TIME. BE SURE
THAT THE POWER SOURCE CHOSEN WILL PROVIDE THE NECESSARY POWER
FOR THE TIME REQUIRED TO RECHARGE A BATTERY. THE CHARGING SYSTEM
WILL NOT RECHARGE A BATTERY IF THE POWER SOURCE TO THE CHARGER
IS NOT ACTIVE. CONSULT THE BUILDER OF YOUR VEHICLE IF YOU HAVE ANY
QUESTIONS ABOUT ITS AVAILABLE POWER SOURCES BEFORE INSTALLING THE
CHARGING SYSTEM.
