Scott 2015 PLASMA 5 Owner'S Manual Download Page 2

02

  

PLASMA 5

  |  BIKE OWNER’S MANUAL 2015

BIKE OWNER’S MANUAL 2015  |  

  

PLASMA 5

03

www.scott-sports.com

E

N

G

LI

S

H

E

N

G

LI

S

H

The Plasma Carbon bikes should be adjusted exactly to the 
current rider for reaching maximum safety and performance 
while riding.

Please note that all adjustments should be done at your local 
SCOTT dealer or following to this manual.

CONTENT

Plasma Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04

Geometry/Technical Data Plasma 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05

Plasma 5 Frameset Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06

Specific Torques Values Table.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 06

Rear Drop out and Replaceable Derailleur Hanger .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 06

Cable Routing: for Electronic Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08

Cable Routing: for Mechanical Shifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Fork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Headset/Stem Body TT5.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   . 12

Seatpost . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Stem/Handlebar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Brake Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Storage Box .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  22

Hydration System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Warranty .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   24

Summary of Contents for 2015 PLASMA 5














Reviews: