Scott 2015 PLASMA 5 Owner'S Manual Download Page 13

24

  

PLASMA 5

  |  BIKE OWNER’S MANUAL 2015

BIKE OWNER’S MANUAL 2015  |  

  

PLASMA 5

25

E

N

G

LI

S

H

E

N

G

LI

S

H

SCOTT bikes are made using the most innovative production and quality methods. They 
are equipped with best components of well known parts suppliers.
Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance 
with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for 
two years for defects in material and/or workmanship in case of purchase of completely 
assembled bikes.
This warranty of 5 years for the frames shall only be granted in case once a year a 
maintenance service has been effected according to maintenance requirements as set 
forth in this manual by an authorised SCOTT dealer.
The authorised SCOTT dealer shall confirm the effected annual maintenance service by 
stamp and signature.
In case such an annual maintenance service has not been effected the warranty of 5 years 
for the frame shall be reduced to 3 years.
Costs for maintenance and service have to be born by the owner of the SCOTT bike.
On Gambler, Voltage Fr and Volt-X the warranty period is limited to 2 years.
The warranty period starts at the day of purchase. This warranty is limited to the first 
buyer, what means the first person who uses the bike and only with the use it was made 
for. Furthermore, this warranty is limited to purchases via authorized SCOTT-dealers
The warranty is solely granted in case of purchase of a completely assembled bike to the 
explicit exclusion of purchases of not completely assembled bikes.
In case of a warranty claim the decision to repair or to replace the defective part is up to 
SCOTT. Non defective parts will only be replaced at the guarantee’s own expense.
Fair wear and tear is not covered by the warranty.
A complete list of all parts of wear and tear can be found in the next chapter of this 
manual.
In addition, you will find at the end of this manual a protocol for the handing over of the 
bike which will remain in copy at the SCOTT dealer after acceptance and signature of the 
consumer.
It is obligatory to show this protocol of handing over together with the defective part 
in case of a warranty claim given that it provides evidence of purchase. Otherwise no 
warranty is granted.
In principle, this warranty is granted worldwide. Claims must be made through an 
authorized dealer, for information regarding the nearest dealer, write or call this company 
or the national SCOTT distributor.
Normal wear, accident, neglect, abuse, improper assembly, improper maintenance by 
other than an authorized dealer or use of parts or devices not consistent with the use 
originally intended for the bicycle as sold are not covered by this warranty.
Hereby SCOTT grants a voluntarily manufacturer’s warranty. Additional entitlements 
according to national warrant of merchantability are reserved.
For warranty info on the Fox Nude shock please refer to the attached manual of Fox Nude.

Model   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Year   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Frame Nr.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Shock Nr.   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Date of purchase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WARRANTY

WARRANTY

Summary of Contents for 2015 PLASMA 5














Reviews: