Pagina 3
Pagina 3
• Cut straps A and remove carton B, polystyrene
D and external plastic bag C.
• Remove the base E.
• Place the appliance in its installation site
(pitc 5).
2.1 ADVICE ON HOW TO PROTECT THE
ENVIRONMENT
Packaging
Packaging material is 100% recyclable.
For its disposal follow your local regulations.
The packaging material (plastic bags, polystyrene
parts etc.) must be kept out of children’s reach as
it could be dangerous.
Information
This appliance does not contain CFCs (the cooling
circuit contains a gas that is not harmful to the
ozone layer).
For further details, please refer to the serial data
plate on the appliance.
Produkt
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE). By
ensuring this product is disposed of correctly,
you will help prevent potential negative conse-
quences for the environment and human health,
which could otherwise be caused by inappropriate
waste handling of this product.
The symbol on the product, or on the
documents accompanying the product,
indicates that this appliance may not be
treated as household waste. Instead it
shall be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment.
2
REMOVAL OF PACKAGING
Disposal must be carried out in accordance with
local environmental regulations for waste
disposal.For more detailed information about
treatment, recovery and recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
3
DESCRIPTION OF THE APPLIANCE
These water coolers are designed to offer
maximum hygiene and easy maintenance.
They are manufactured with a high level perfor-
mance.
The direct water cooling system guarantees an
optimal hygiene for factories, offices, communities
and public places.
Can be used free standing or wall tight to avoid
unsightly connections.
Exclusive Projector Design: 2-stream mound-
building projector and automatic stream regulator.
Plumbing Connections: enter directly into cabinet.
Waste 24 mm (1”) IPS.
Supply 8 mm (3/7”) IPS.
Finish: stainless steel.
1 Front panel
2 Dispensing water plate
3 Front panel screws
4 Water stream projector
5 Aeration grill (do not cover)
6 Push button actuator
7 Water INLET connection 8 mm (3/7”) with No Return
valve optional
8 Electrical box
9 Thermostat box
10 Water temperature
11 Unit nameplate adjusting screw
Summary of Contents for SW 12 USPH-S
Page 6: ...5 4 7 8 9 10 11 5 6 F H G...
