SPECIFICATIONS
Always refer to the nameplate, located on the back
of the cabinet, for the:
••
model number,
••
serial number,
••
basic electrical
requirements,
••
minimum circuit ampacity,
••
maximum fuse size,
••
and refrigerant charge.
A serial number plate with the model number,
serial number and refrigerant charge is located
behind the front panel, near the control box.
The unit comes from the factory with the correct
refrigerant charge. The refrigerant charge
information is for recharging, should that be
necessary.
All utility connections are made at the back of the
ice maker.
Before beginning installation, be sure that all of the
components necessary for complete assembly of
the ice system are available, and are the correct
components with regard to model, voltage, and
finish.
Installer: After installation, take this manual with
you, do NOT leave it with the machine.
MCM1062W
September 1993
Page 2
