INITIAL START UP
1. Sanitize the ice storage system as instructed on
page 11.
2. Fill hopper with sanitary ice.
3. Plug the unit’s power cord into an electrical
outlet and the lighted sign should come on.
Dispense several containers of ice.
In normal operation, pushing the ice dispenser
mechanism will cause ice to flow from the ice
chute. Ice flow will continue until the dispenser
mechanism is released.
CAUTION: Use caution to avoid spilling ice when
filling dispenser. Clean up immediately any spilled
ice from filling or operating the unit. To prevent
contamination of ice, the lid must be installed on
the unit at all times.
If the dispenser fails to dispense ice or beverage
see troubleshooting guide.
ID150, ID200, ID250
May 2002
Page 8
