WATER GLASS FILLER KIT
Installation Instructions
WARNING: Disconnect power to unit before
proceeding with installation
1. Prepare unit as follows:
·
Remove lower front panel.
·
Locate new holes in front panel.
2. Install faucet and tubing assembly as shown
below.
3. Connect field water supply to ¼ male flare fitting
on tubing assembly. Apply water pressure and
check all connections for leaks. Check faucet for
proper operation. Check that tubing assembly does
not interfere with wiring or electrical components.
4. Carefully reinstall panels on unit.
ID150, ID200, ID250
May 2002
Page 5
