How To Operate The AutoIQ Controller
The AutoIQ Controller is a
microprocessor based device that
receives input from several sources
and switches various components on
and off.
Its manual control is thru the use of
the Push Button Control Switches
1.
Freeze Button.
Pushing and
releasing this button starts or restarts
the machine. The AutoIQ Controller
remembers what cycle it was last in
and returns to that cycle.
2.
Harvest Button:
Pushing and
releasing this button will cause the
machine to go directly to a Harvest
Cycle. Can be done from Freeze or
Off. The machine will switch Off at the
end of the Harvest cycle.
3.
Clean Button:
Pushing and
releasing this button will cause the
machine to empty the reservoir, refill
and leave only the water pump on for
circulation of ice machine cleaner.
After the ice machine cleaner has
circulated for about 10 minutes a
second push of this button will switch
on the rinsing system to flush out the
dissolved scale and ice machine
cleaner.
4.
Off Button
: Pushing and releasing
this button will switch the machine
OFF at the end of the next cycle. If the
button is pushed and HELD for more
than 3 seconds, the unit will switch off
immediately.
To Reset Errors: First push and
release the Off button, then push and
release the Freeze button.
CME456R
December 2000
Page 18
1
2
3
4
5
6
7
8
9
BIN FULL
FREEZE
HARVEST
CLEAN
OFF
WATER
REFRIGERATION
PUSH BUTTON
CONTROL SWITCHES
INDICATOR LIGHTS:
DIAGNOSTIC LIGHTS:
