Controller
1
Disconnect electrical power.
2
Remove front panel.
3
Open control box door.
4
Unplug all wires from controller.
5
Remove screws holding controller to door
6
Push controller snaps down and pull controller from
mounting bracket.
7
Before touching new controller, discharge any
static electricity by touching the metal surface of
the ice machine cabinet.
8
Rotate selector switch to the proper model number
for the machine the controller is being installed on.
9
Install new controller on mounting bracket, secure
with original screws.
Note: Be SURE the controller is snapped into place
and all screws returned to their original spots.
10 Attach all wires removed.
11 Shut control box cover.
12 Switch on the electrical power.
November 2010
Page 42
C2648 Service Manual
Repair Procedures
Controller's Model Selector Switch
Electrical Shock Hazard.
Disconnect electrical power
before beginning.
