Prodigy Cuber System Information
To Manually Reset the machine.
Push and release the Off button.
Push and release the On button.
To Shut the Machine Off:
1. Push and hold the Off button for 3 seconds or
until the machine stops.
November 2010
Page 23
C2648 Service Manual - Installation
Technical Highlights
•
3 Evaporators
•
3 Thermostatic Expansion Valves
•
3 Harvest Assist Solenoids
•
3 Hot Gas Valves
•
1 OPR valve
Ice making or the freeze cycle is controlled by an ice thickness sensor on the far left evaporator.
When the ice is the correct size the controller switches the machine to a harvest cycle.
All three hot gas valves open at the same time.
Harvest continues until all 3 curtains have opened. After all 3 curtains have opened and re-closed,
the freeze cycle restarts.
If one or more of the curtains stay open for 30 seconds or longer, the controller switches the
machine off (closes the liquid line solenoid valve then shuts the compressor off) and signals bin
full. It will restart ice making when all three curtains are closed.
The OPR valve is set to limit dome pressure during harvest to 80 PSIG.
The optional KVS (Vari-Smart) sensor location is in the base behind the compressor.
Reset or Switch Off
