Scosche BlueFusion BFCL2K Instruction Download Page 4

4

IMPORTANT NOTE:

  BFEXTB extension is required on vehicles that have their 

SAT Tuners located at the rear of the vehicle.  BFETXB is sold separately 
(Not included) (Impala, Monte Carlo). 

TECH TIP:

 Do not route BFEXTB extension cable over sharp edges or near 

moving parts.

BFEXT INSTALLATION:

1. Locate XM tuner box in vehicle.
2. Remove XM harness from XM tuner.
3. Install BFGMLANXMB T harness 
    between the Factory XM harness 
    and XM SAT Tuner.
4. Plug the 24 pin Female connector in 
    to the “T” harness in place of 
    where the BlueFusion module 
    would connect.
5. Route BFEXTB cable to under 
    driver’s seat location.
4. Plug the 24 BFEXTB Male 
    connector into the BFGMK 
    BlueFusion interface.

TECH TIP:

 Aim microphone towards the driver’s seat

MICROPHONE INSTALLATION:

1. Attach the microphone to the headliner above the rear view mirror.
2. Carefully route the microphone cable behind the headliner and down the 
    “A” (front most) pillar
    Use caution when routing cable and avoid sharp edges or moving metal parts.
3. Route the cable to the BlueFusion interface location and plug it into the 3-pin    
    connector on the Scosche “T “harness.

VEHICLES WITH REAR SAT TUNER

XM HARNES

S

MICROPHONE

3-PIN

XM TUNER

BOX

CAR HARNESS

10ft. EXTENSION

TRUNK MOUNTED

24-Pin

BLUEFUSION MICROPHONE INSTALLATION

VEHICLES 

XM HARNESS

Summary of Contents for BlueFusion BFCL2K













Reviews: