9. To lock axle, insert the blue key into the center of the
Scorpion body located on the back side of the device.
Turn the supplied blue key clockwise to tighten the
screw and lock the axle into place.
10. Secure top and bottom leg by inserting the blue key
into the center of the Scorpion Body located on the
back side of the device. Turn the blue key clockwise to
tighten the screw and lock the axle into place.
11. Feed charging cable through before attaching
Scorpion to the base.
12. Place the installed device into the receiver.
Press the lock in to secure. Scorpion should now be
locked into place.
8. After securing leveling plate, go back and tighten
side legs. There will no longer be a gap between the
screen and legs when the leveling plate has been
properly raised.
IMPORTANT
Do not over tighten the leveling plate.
If you see a bump or bubble in the screen,
or bend in the device, the leveling plates
are over tightened.
Please refrain from over tightening as this
may damage the device.
*IMPORTANT* MUST LOCK AXLE TO FULLY SECURE
