RCS (Range Confirmation Signal)
If the system is armed and the Transceiver is within range of the MCM the LCD displays icon
If the Transceiver does not receive the RCS signal the icon will not appear.
Transceiver Battery Status
The LCD will display 3 different
icons to show the Transceiver battery status.
Operating Instructions
The following instruction assumes that the transceiver is with in range of the motorcycle.
Arm
1.
Press button #1, siren chirps 3 times and the turn signal lights flash 1 time.
2.
The Transceiver echoes 3 chirps and the LCD displays and
and
PERIMT OFF
icons.
Disarm
1.
Press button #2, siren chirps 1 time and lights flash 1 time.
2.
The Transceiver echoes 1 chirp and the LCD displays icon.
Arming With Optional Perimeter Sensor
1.
Press button #3, siren chirps 4 times and turn signal lights flash 1 time.
2.
The Transceiver echoes 4 chirps and the LCD displays
,
icons.
3.
The system is armed and the Perimeter Sensor is activated.
Arming Without Siren / Paging Only
1.
Press buttons #1 and #3 at the same time, siren chirps 5 times and the turn signal lights
flash 1 time.
2.
The Transceiver echoes 5 chirps and the LCD displays
,
and
icons.
3.
The system is armed but the siren and turn signal lights are disabled for a silent paging
only alert.
Arming Without Siren or Perimeter Sensor (optional) / Paging Only
1.
Press buttons #2 and #3 at the same time, siren chirps 6 times and the turn signal lights
flash 1 time.
2.
The Transceiver echoes 6 chirps and the LCD displays
, ,
and
PERIMT OFF
icons.
3.
The system is armed but the siren, turn signal lights and perimeter sensor are disabled.
Panic/ Stop Trigger
a.
When system is armed press button #3 for Panic feature. (panic feature will
sound siren for a few seconds, drawing attention to your bike)
b.
Pressing button #3 during an alarm trigger stops the alarm cycle but keeps
the system armed.
6