Scooterpac Ignite | User Manual
27
7.12
USB Charging Ports
The Ignite is equipped with USB Charging Ports on the right-hand side of the tiller
column.
The two USB ports provide different power outputs.
USB Port 1
is located next to the
LED light and
USB Port 2
can be found on right hand side.
Smaller devices will perform best in the left port (
Port 1
), while newer devices will work
better in the right port (
Port 2
).
The power available from each port:
•
USB Port 1
: 5v – 0.5amp
Suitable for older devices manufactured prior to 2015.
•
USB Port 2
: 5v – 2.0amp
Suitable for newer devices, manufactured after 2015 – this will provide a higher
charging rate.
TOP TIP – If unsure, please check the user manual of the device you would like to
power to confirm required charging rate.
Figure 13 - USB charge ports
2
1
Summary of Contents for Ignite
