Scooterpac Ignite, User Manual, Page: 20 / 44

Scooterpac Ignite | User Manual 20
7.6.1.3 Throttle Levers
Acceleration and deceleration are controlled by the red and green levers on the tiller. They are designed to prevent both
the forward and reverse functions from being activated at the same time.
To move forward, gently squeeze the green lever. The Ignite will accelerate up to the maximum allowable speed set by the
speed controls.
To slow down or stop, release the accelerator and the car will stop. In an emergency the handbrake can be applied by
pulling the brake handle located on the right of the handlebars.
Reverse mode can be activated by pulling the red lever when the car is stationary. For more information on reverse mode
please see 7.6.3 Reversing.
7.6.2 Freewheel Function
Occasionally you may need to move the Ignite without engaging the motor. This can be achieved by pressing and holding
the “Freewheel” button. The car must be switched on, with keys in the ignition and power to the main display.
Press and hold the button marked with this symbol:
Release the button to re-engage the brakes:
For your own safety, only operate this function when on a flat surface. When in freewheel mode care must be taken to
manoeuvre the car safely as there is no brake function.
TOP TIP – The car will continue to roll if pushed.