Page
14
of
21
UbiID
–
Naming Each Half of the UbiDuo 3
To set the ID of the current half of the UbiDuo 3, tap the UbiID icon on the
screen or press the Tab key to highlight the UbiID icon, the press Enter. The
UbiID is simply a name you assign to each half of the UbiDuo 3 to make it easier
to tell them apart a
nd to also reflect “who said what” during a conversation
that has been saved.
Providing a name for each half of the UbiDuo 3 is required if you want your
UbiID to appear in the “In Range” setting of other UbiDuo 3 devices when you
are within range (300 feet).
Simple Three-Step process:
1.
Clear the current default data by using your “backspace” key;
2.
Type in the name you wish to assign to your half of the UbiDuo 3 in the Unit ID field; then
3.
Tap Accept, or use the Tab key to highlight the Accept bar, then press Enter.
NOTE:
You must name each half of the UbiDuo 3 separately.
About
The current version of the UbiOS and other UbiDuo 3 software can be viewed here, as well as battery voltage
and charging percentages.
In Range
The In Range function lets you detect whether or not other UbiDuo 3
units are within a 300-foot perimeter of your UbiDuo 3. While you can
view a list of these other units on your device, they will not be able to
connect to your device and engage in conversation unless you explicitly
send them a chat invitation and it is accepted.
Inviting Other UbiDuo 3 Devices to Chat
When you tap the In Range icon in the Settings menu, or press the Tab
key until the In Range icon is highlighted; then press Enter, a list of
potential Chat Partners will appear. The other half of your UbiDuo 3 will
always be listed and you will always have connection to it. If other
UbiDuo 3 devices are within a 300-foot range and have been assigned
UbiIDs they will also be listed. UbiDuo 3 devices that have not been
assigned device IDs will not be listed.
