SCM Microsystems SCL01X, Reference Manual

Page: 54 / 78

SCL01X R
EFERENCE
M
ANUAL
54
6.4.4.5. Write
Description
When an NFC Forum tag type 3 receives this command, it writes the records of the specified
service.
Format
CLA INS P1 P2 P3 Data
0xFF 0x48 Number of
services
Number of
blocks
2*(P1 + P2)
+ (16 * P2)
Service Code List,
Block List, Block Data
Response
Data SW1 SW2
8 bytes IDm + Status Flag 1 + Status Flag 2 0x90 0x00
6.4.4.6. Request System Code
Description
<TBC>
Format
CLA INS P1 P2 P3 Data
0xFF 0x4A 0x00 0x00 0x00 -
Response
Data SW1 SW2
8 bytes IDm + No. of System Codes (n) +
System Code List (2n)
0x90 0x00
6.4.5. Commands for communicating with NFC Forum Tags Type 4
There is no need to define specific APDU commands as command T=CL command already
defined earlier can be used.
Please refer to NFC Forum tag type 4 specification for definition of the commands to be used
6.4.6. PASS_THROUGH command
Description
This command can be used to send raw data to the user token. SCL3711 will not add transport
protocol data to the raw data
– e.g. PCB, NAD, CID etc.
Format
CLA INS P1 P2 P3 Data
0xFF 0xEF 0x00 0x00 Lraw_data Raw_data
Response