3-2
Setting up TV Photo Show
Connecting TV Photo Show to your computer is even simpler than it was to
connect it to your television. Refer to Chapter 1 for detailed illustrations of the
connections to the unit.
1.
Connect the power supply to TV Photo Show’s DC IN socket and then plug
the AC adapter into an electric outlet.
2.
Plug one end of the USB cable (USB Type A connector) into an available USB
port on your computer, then plug the other end (USB Type B connector) into
the USB port on the back of TV Photo Show. Your computer can be running
while you do this.
3.
On the side of the TV Photo Show unit, slide the POWER switch to ON.
Check that the green light on the front of TV Photo Show comes on, ensuring
that it is receiving power.
4.
If you are running Windows 98SE, you must install a separate driver. This is
available as a free download on the www.dazzle.com web site. You will
also find instructions there for installing the driver. If you are running the 2000,
ME or XP operating system, it will work automatically without a driver.
5.
Insert your memory card into the TV Photo Show unit.
