9
© 2007-2009 SCK Direct, Inc. 229-51363 Rev C www.MySCK.com
6.
Set the port setting to:
Bits per second = 57600
Databits = 8
Parity = None
Stop Bits = 1
Flow Control = None
Then click OK.
7.
Click OK, Your Hyper Terminal screen will now be
shown.
8.
Click on the PROPERTIES Icon, then SETTINGS,
then click ASCII setup.
SETTING UP COMPUTER TO CHANGE
PARAMETERS USING HYPER TERMINAL:
EXAMPLE (WINDOWS 2000/XP)
1.
Click on START.
2.
Go to PROGRAMS, then to ACCESSORIES, then
COMMUNICATIONS.
3.
Click on HYPERTERMINAL.
4.
Name the connection SmartDirect 2 and choose
an icon.
5.
Choose the Com port that the USB is plugged
into on your computer.
installation guide
STEPS ON THE FOLLOWING 3 PAGES SHOULD BE PERFORMED BY AUTHORIZED USERS ONLY.