Copyright (c) Scintex www.scintex.com.au [email protected]
Page 11
Image 16
STEP 9 - Fitting the Hoses
Label
Length
Location
1A Hose 3/4"
300mm
Left top manifold outlet to 200L
1B Hose 3/4"
300mm
Right top manifold outlet to 60L
1C Hose 3/4"
600mm
Pump suction to lower manifold
1G Hose 3/4"
2300mm
Filter outlet (bottom) return to 200L
1D Hose 3/4"
2000mm
Lower manifold fill vessel hose
1E Hose 3/4"
500mm
Pump discharge to filter housing (clamps)
1F Hose 3/4"
750mm
Filter bypass hose (top to bottom housing)
See Diagram 1 at the end of this document. Ensure to use a hose clamp on each hose tail
fitting. Note: Some hoses are only required if you have purchased the BD150 Package with
filter housing.
